DJI Power 1000 (EU)

The DJI Power 1000 portable power station has a 1024 Wh battery capacity and provides a maximum output of 2200 W. It can also quickly charge DJI drone batteries! On sale from 18.4.2024.

• Fast charging of DJI drones (requires optional cabling)
• Internal battery fully charged in 70 minutes, to 80% in 50 minutes
• LFP cell with a lifetime of approximately 10 years (at approx. 1x cycle per day)
• Two USB-C output ports (max 140 W/port, PD 3.1)
• Maximum output power 2200 W
• Meets the power requirements of most common household appliances (max. 2000 W)
• Optional solar charging
• Very quiet operation (approx. 23 dB)

The DJI Power 1000 portable power supply provides stable power for e.g. home appliances, film and photography equipment, mobile phones, but also - with separately sold charging cables - allows you to quickly charge the batteries of DJI drones with the DJI Power SDC super-fast charging function, in approximately 30 minutes. With three drone batteries and a DJI portable power station, you can enjoy a full day of carefree flying and filming.

Wide range of charging options
The DJI Power 1000 can be recharged in three ways: from the mains, using the optional solar panel and from a car power outlet (requires DJI Power Car Outlet to SDC Power Cable). When connected to the mains, the DJI Power 1000 supports both 1200W fast charge mode and 600W standard charge mode, with the fastest charge time being 70 minutes for 100% capacity. It can also charge to 80% in just 50 minutes.

The DJI Power 1000 can also be connected to solar panels via the DJI Power Solar Panel Adapter Module (MPPT) or the DJI Power Car Power Outlet to SDC Power Cable, and recharged using solar power. MPPT (Maximum Power Point Tracking) is an intelligent algorithm that supports real-time tracking of the voltage generated by the connected solar panels. By tracking and maintaining the highest voltage and current (V-I) values, it allows the solar panels to optimally and efficiently recharge the DJI Power 1000. DJI recommends solar panels from DJI-certified Zignes. The DJI Power 1000 supports a maximum power input of 800W and can be fully recharged with solar power in approximately 1.35 to 2.8 hours.

High safety
Safety comes first. The DJI Power 1000 features a comprehensive safety design, from body construction and cell chemistry to system software. It has passed 26 product test certifications from the Swiss independent testing authority SGS, guaranteeing worry-free use of electrical devices. The LFP cell used is safe and durable and can achieve up to 3,000 charge cycles, ensuring a service life of approximately 10 years, even with frequent use. 11 temperature sensors on the device continuously monitor heat dissipation and the power station can operate safely in temperatures as low as 40°C.

Interface
The DJI Power 1000 has two 140W USB-C output ports with a total power output of up to 280W, which is 40% more than the commonly available two 100W USB-C output ports. It can easily meet the power requirements of most USB-C devices while supporting up to 140W of PD 3.1 charging, which can quickly charge a 16" MacBook Pro, for example. It also offers two USB-A ports, two AC output ports, one SDC port, one SDC Lite port and two 1/4" threads. Thus, it can be connected to different types of solar panels, power cords and adapter cables to meet the needs of different power and charging options.

UPS mode
When an electrical device is connected to a powered DJI Power 1000 device (via the AC output port) and both devices are powered from the mains, the DJI Power 1000 switches to UPS (uninterruptible power supply) mode. In the event of a sudden power failure, the DJI Power 1000 can begin powering the connected device within 0.02 seconds, ensuring uninterrupted operation.

Ultra-quiet operation
The noise level of the DJI Power 1000 is only 23 dB during charging, which is lower than most home refrigerators, so it does not disturb even in quiet environments.

• 1024 Wh capacity
• Maximum power output for AC 2200 W
• Weight approx. 13 kg
• Dimensions 448 × 225 × 230 mm
• LFP cell type
• Interfaces: 2x 140W USB-C, 2x 24W USB-A, 1x SDC, 1x SDC Lite, 2x AC power output, 1x AC power input